American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016 Uživatelský manuál stáhnout pdf

RECOMMENDED TOOLS AND MATERIALS

Putty Knife Regular Screwdriver Adjustable Wrench Sealant Tape Measure

Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level

1 REMOVE OLD TOILET

a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b. Disconnect and remove supply line. NOTE:

If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

NOTE:

Mounting surface must be clean and level before new toilet is installed!

INSTALL CLOSET BOLTS

Install closet bolts in flange channel, turn 90

and slide into place 6" (152 mm) apart and

parallel to wall.

CLOSET FLANGE

CLOSET BOLTS

730729-100

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

Product names listed herein are trademarks of American Standard Inc.

NOTE:

Pictures may not exactly define contour of china and components.

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product

is installed properly, please read these instructions carefully before you begin. (Certain installations may require

professional help.) Also be sure your installation conforms to local codes.

INSTALLATION INSTRUCTIONS

Models 2405.016 and 2408.016

Retrospect Two Piece Toilet

WAX RING

SEALANT

INSTALL WAX SEAL

Invert toilet on floor (cushion to prevent

damage), and install wax ring evenly

around waste flange (horn), with

tapered end of ring facing toilet. Apply

a thin bead of sealant around toilet

base.

SAVE FOR FUTURE USE

444mm

(17-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2) CENTERS)

381mm

(15)

719mm

(28-5/16)

216mm (8-1/2")

25mm

± 6mm

(1 ± 1/4)

FINISHED WALL

159mm

(6-1/4)

C/L OF OUTLET

344mm

(13-9/16)

13mm

(1/2)

90mm

(3-9/16")

305mm

(12)

794mm

(31-1/4)

486mm

(19-1/8)

406mm

(16)

279mm

(11)

152mm

(6)

SUPPLY AS

REQUIRED

FINISHED

FLOOR

222mm

(8-3/4)

C/L

2408.016 RETROSPECT RF

2405.016 RETROSPECT EL

494mm

(19-7/16")

C/L OF SEAT POST

MTG HOLES ON

140mm (5-1/2") CTRS

168mm (6-5/8")

389mm (15-5/16")

273mm

(11-5/8")

838mm

(33")

425mm

(16-3/4")

C/L OF SUPPLY

AS REQUIRED

FINISHED

FLOOR

13mm (1/2")

90mm

(3-9/16")

305mm

(12")

486mm

(19-1/8")

152mm (6")

203mm

(8")

C/L OF OUTLET AND

TOILET MTG BOLTS

768mm

(30-1/4")

216mm

(8-1/2")

25 ± 6mm (1 ± 1/4")

400mm

(15-3/4")

FINISHED WALL

C/L

1 2 3 4

Shrnutí obsahu

Strany 1 - INSTALLATION INSTRUCTIONS

RECOMMENDED TOOLS AND MATERIALSPutty Knife Regular Screwdriver Adjustable Wrench Sealant Tape MeasureHacksaw Wax Ring/Gasket Flexible Supply Tube Clos

Strany 2 - SUPPLY LINE

730729-1005POSITION TOILET ON FLANGEa. Unplug floor waste opening and install toilet on closet flange so bolts project through mounting holes.b. Loose

Strany 3 - REPAIR PARTS LIST

730729-10010 11 ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup.See Step

Strany 4 - San Juan Capistrano, CA 92675

730729-10013AMERICAN STANDARD ONE-YEAR LIMITED WARRANTYIf inspection of this American Standard plumbing product, within one year after its initial pur

Komentáře k této Příručce

Žádné komentáře

American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zdravotnický sortiment American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016. American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016 User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Zdravotnický sortiment American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016