American Standard Multi-tool 2891 Uživatelský manuál stáhnout pdf

7301690-100 Rev. E

Product names listed herein are trademarks of AS America, Inc.

RECOMMENDED TOOLS AND MATERIALS

Putty Knife

Closet Bolts

Regular Screwdriver

Wax Ring/Gasket

Adjustable Wrench

Flexible Supply Tube

Sealant

Hacksaw

Carpenters Level

Tape Measure

ROUGHING-IN DIMENSIONS:

REMOVE OLD TOILET

a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b. Disconnect and remove supply line.

NOTE: If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

NOTE: Mounting surface must be clean and level before new toilet is installed!

SAVE FOR FUTURE USE

BOULEVARD

Dual Flush One-Piece Toilet

Model 2891-Elongated Right Height

with Seat

Model 2891-BOULEVARD DUAL FLUSH ONE PIECE TOILET

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure

this product is installed properly, please read these instructions carefully before you begin. (Certain

installations may require professional help.) Also be sure your installation conforms to local codes.

INSTALLATION INSTRUCTIONS

Certiﬁed by

IAPMO R&T

NOTE: Distance from wall to closet flange centerline must be as listed below:

IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in). First suggested position is

hidden behind the toilet. The geometry of the toilet gives space for this installation. The second suggested position is next to the toilet.

Between these two positions, the space for the supply between wall and toilet is limited to 3-1/4". In this case, check your supply and

hose dimensions.

29-3/4"

(756 mm)

7-1/2"

(192 mm)

3/4"

(19 mm)

18-1/2"

(470 mm)

16-1/2"

(419 mm)

14-1/2"

(368 mm)

30-7/8"

(784 mm)

13-1/2"

(345 mm)

14-1/4"

(364 mm)

8-1/2"

(217 mm)

12"

(305 mm)

C/L OF SEAT POST

HOLES 5-1/2"

(140mm) CENTERS

FINISHED WALL

3-3/8"

(86mm)

3-1/2"

(83mm)

SUPPLY

REQUIRED

(position 1 or

position 2)

(152mm)

5-1/2"

(140mm)

3-3/4"

(95mm)

(229mm)

14"

(350 mm)

FINISHED

FLOOR

1 2 3 4

Shrnutí obsahu

Strany 1 - INSTALLATION INSTRUCTIONS

7301690-100 Rev. EProduct names listed herein are trademarks of AS America, Inc.© AS America, Inc. 2012RECOMMENDED TOOLS AND MATERIALSPutty KnifeClose

Strany 2 - DO NOT OVERTIGHTEN

- 2 -7301690-100 Rev. E8a8bBefore continuing, determine the type of water supply connection you have from the chart below and use the appropriate asse

Strany 3 - Diagram 1

11910Turn on water supply. Submerge the FLOAT CUP under the water for 30 seconds. Adjust the water to desired level by turning WATER LEVEL ADJUSTMENT

Strany 4 - REPAIR PARTS LIST

7301690-100 Rev. EDoes not flushPoor or sluggish flushToilet leaksToilet does not shut offa. Water supply valve closed.b. Supply line blocked.c. Sa

Komentáře k této Příručce

Žádné komentáře

American Standard Multi-tool 2891 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zásobníky vody American Standard Multi-tool 2891. American Standard Multi-tool 2891 User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Zásobníky vody American Standard Multi-tool 2891