American Standard 3189.016.021 Instalační příručka stáhnout pdf

RECOMMENDED TOOLS AND MATERIALS

Putty Knife Regular Screwdriver Adjustable Wrench Sealant Tape Measure

Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level

1 REMOVE OLD TOILET

a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

NOTE: Mounting surface must be clean and level before new toilet is installed!

INSTALL CLOSET BOLTS

Install closet bolts in flange channel and slide

into place parallel to wall.

SAVE FOR FUTURE USE

CLOSET FLANGE

CLOSET BOLTS

7301152-100 Rev. P

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

Product names listed herein are trademarks of AS America Inc.

NOTE: Pictures may not exactly define contour of china and components.

ROUGHING-IN DIMENSIONS:

NOTE: Distance from wall to closet

flange centerline must be as listed:

FINISHED WALL

FINISHED

FLOOR

SUPPLY

REQ'D.

WAX RING

SEALANT

INSTALL WAX SEAL

Invert toilet on floor (cushion to prevent damage), and

install wax ring evenly around waste flange (horn), with

tapered end of ring facing toilet. Apply a thin bead of

sealant around toilet base.

POSITION TOILET ON FLANGE

a. Unplug floor waste opening and install toilet on closet flange so bolts project

through mounting holes.

b. Loosely install retainer washers and nuts. Side of washers marked "THIS

SIDE UP" must face up!

CLOSET

BOLT

NUT

TAPERED

WASHER

FLANGE

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is

installed properly, please read these instructions carefully before you begin. (Certain installations may require professional

help.) Also be sure your installation conforms to local codes.

Models 2435 / 2436 / 2437 / 2453 / 2485 / 2486 / 2487

Colony FitRight Two-Piece Toilet

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

MODELS DIMENSION “A”

12"

(305mm)

10"

(254mm)

2437

2453

2435

2436

24872485

2486

1 2 3 4

Shrnutí obsahu

Strany 1 - CARE AND MAINTENANCE

RECOMMENDED TOOLS AND MATERIALSPutty Knife Regular Screwdriver Adjustable Wrench Sealant Tape MeasureHacksaw Wax Ring/Gasket Flexi

Strany 2 - PLASTIC SUPPLY LINE

7301152-100 Rev. P687INSTALL TOILETa. Position toilet squarely to wall and, with a rocking motion, press bowl down fully on wax ring and flange.

Strany 3 - San Juan Capistrano, CA 92675

7301152-100 Rev. P10 111312- 3 -CARE AND CLEANINGWhen cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry

Strany 4

For Repair Parts List, See Under Tank Lid.7301152-100 Rev. PTROUBLESHOOTING GUIDE PROBLEM POSSI

Komentáře k této Příručce

Žádné komentáře

American Standard 3189.016.021 Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro Zdravotnický sortiment American Standard 3189.016.021. American Standard 3189.016.021 Installation Guide Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Zdravotnický sortiment American Standard 3189.016.021